Definition of CVD Graphene Micro Ribbons with Lithography and Oxygen Plasma Ashing

Tipo
Artigo
Data de publicação
2021
Periódico
Carbon Trends
Citações (Scopus)
6
Autores
Rufino F.C.
Pascon A.M.
Espindola L.C.J.
Cioldin F.H.
Larrude D.R.G.
Diniz J.A.
Orientador
Título da Revista
ISSN da Revista
Título de Volume
Membros da banca
Programa
Resumo
© 2021This work presents the definition of CVD (Chemical Vapor Deposition) Graphene Micro Ribbons (GMRs) with traditional Photolithography and Oxygen Plasma Ashing, where: (i) CVD Graphene Micro Ribbons were defined in parallel and serpentine patterns; (ii) The defined width dimensions of GMRs are between 0.23 µm and 10 µm; (iii) The empirical calibration curve between physical and mask widths of GMRs was obtained; (iv) With our method, Graphene Field-Effect Transistors, GFETs, can be fabricated with parallel GMRs as conduction channel between source and drain. It is important to notice that parallel channels are used in Silicon Nano Wires 3D Transistors, such as FinFETs. Our method is based on low-cost lithography, compared to commonly found in the literature, based on the definition of graphene patterns by Electron Beam Lithography (high cost and low repeatability techniques). Also, graphene's good quality characteristics remain after GMRs fabrication, as proven by Raman spectroscopy. In conclusion, our method to define the GMRs is suitable for GFET technology.
Descrição
Palavras-chave
Assuntos Scopus
Calibration curves , Chemical vapor deposition graphene , Conduction channel , Empirical calibration , GFET technology , Graphene field-effect transistors , Nano-wires , Oxygen plasma ashing , Parallel channel , Source and drains
Citação
DOI (Texto completo)