Prediction of geometrical characteristics and process parameter optimization of laser deposition AISI 316 steel using fuzzy inference
Tipo
Artigo
Data de publicação
2021
Periódico
International Journal of Advanced Manufacturing Technology
Citações (Scopus)
2
Autores
Velazquez D.R.T.
Helleno A.L.
Fals H.C.
dos Santos R.G.
Helleno A.L.
Fals H.C.
dos Santos R.G.
Orientador
Título da Revista
ISSN da Revista
Título de Volume
Membros da banca
Programa
Resumo
© 2021, The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.Laser metal deposition (LMD) process is an additive manufacturing technique that has attracted the interest of the automotive and aerospace industries due to its ability to manufacture parts with complex geometries and different types of metallic materials. However, the structure of the deposited layers and the geometrical characteristics of the manufactured parts are influenced by the interaction among the deposition process parameters. In this paper, fuzzy inference (FIS) technique was used to develop two models for predicting the geometrical characteristics and for optimizing the LMD process parameters. LMD was performed using AISI 316 stainless steel powder and substrate. An experimental design, based on factorial analysis, was used to correlate the influence of selected deposition process parameters, laser power (Lp), powder flow (Pf) and focal length (Fl) with the process geometrical characteristics bead height (Bh), bead width (Bw), depth of penetration (Dp), dilution (d) and wetting angle (wa). The factors Lp and Fl were used with three operating levels each, and the factor Pf was used with two operating levels. An analysis of variance allowed identifying that the Pf affects the Bh, Bh/Bw ratio, d and wa, as well as the increase in Lp showed an increasing of the geometric characteristics Bw and Dp. The first FIS, for predicting the bead’s geometrical characteristics, presented high adequacy (error up to 8.43%) for assessing the experimental conditions. The second FIS showed through the output defuzzified index (ODI) measured the best possible process parameters interaction, given the studied operating conditions and the output variables assessed.
Descrição
Palavras-chave
Assuntos Scopus
AISI 316 stainless steel , Experimental conditions , Geometric characteristics , Geometrical characteristics , Laser metal deposition , Manufacturing techniques , Operating condition , Process parameter optimization