Influence of heat treatment and plasma nitriding parameters on hardening an aisi 420 martensitic stainless steel

Página do item simplificado
dc.contributor.authorPinedo C.E.
dc.contributor.authorMonteiro W.A.
dc.date.accessioned2024-03-13T01:30:05Z
dc.date.available2024-03-13T01:30:05Z
dc.date.issued2010
dc.description.abstractTo increase wear response plasma nitriding have been used with some limitations for martensitic stainless steel type AISI 420. Problems are related to the combination among: hardening, corrosion resistance, wear performance and substrate hardness after the surface treatment. The present paper shows the study of a combination of different heat treatments procedures with plasma nitriding surface treatment using different parameters for MSS AISI 420. Different heat treatments procedures were studied previously to nitriding for a substrate hardness range of 38-50 HRC. Samples were nitrided using DC-Pulsed plasma process. The nitriding temperature ranged from 480 to 560°C, 4 to 16 hours. Samples were characterized by optical microscopy and hardness was evaluated by Rockwell method for substrate and Vickers microhardness for the nitride case. The results show a high hardening effect after plasma nitriding, 1400HV. For substrates treated to 50 HRC the nitriding temperature has a strong effect on the case hardening behavior. Increasing nitriding temperature from 480 to 560°C the substrate hardness decrease considerably and the expected nitriding potential hardening effect is missing. Using 38 HRC as initial substrate hardness the hardening effect is preserved over the same nitriding temperature range. As a consequence different planning between heat treatment and nitriding cycles are discussed. Copyright © (2010) by Associação Brasileira de Metalurgia Materiais e Mineração (ABM).
dc.description.firstpage4061
dc.description.lastpage4068
dc.description.volume5
dc.identifier.urihttps://dspace.mackenzie.br/handle/10899/37104
dc.relation.ispartof65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010
dc.rightsAcesso Restrito
dc.subject.otherlanguageHeat treatment
dc.subject.otherlanguageMartensitic stainless steel
dc.subject.otherlanguagePlasma nitriding
dc.titleInfluence of heat treatment and plasma nitriding parameters on hardening an aisi 420 martensitic stainless steel
dc.typeArtigo de evento
local.scopus.citations0
local.scopus.eid2-s2.0-84893238854
local.scopus.subjectAisi 420 martensitic stainless steels
local.scopus.subjectHardening behavior
local.scopus.subjectHardening effects
local.scopus.subjectNitriding potential
local.scopus.subjectNitriding temperatures
local.scopus.subjectPlasma nitriding
local.scopus.subjectSubstrate hardness
local.scopus.subjectVickers microhardness
local.scopus.updated2024-05-01
local.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84893238854&origin=inward
Arquivos
Coleções
Artigo de evento