Creep behavior evaluation and characterization of SiC film with Cr interlayer deposited by HiPIMS in Ti-6Al-4V alloy
Tipo
Artigo
Data de publicação
2017
Periódico
Surface and Coatings Technology
Citações (Scopus)
11
Autores
Sugahara T.
Martins G.V.
Montoro F.E.
Merij Neto A.
Massi M.
da Silva Sobrinho A.S.
Reis D.A.P.
Martins G.V.
Montoro F.E.
Merij Neto A.
Massi M.
da Silva Sobrinho A.S.
Reis D.A.P.
Orientador
Título da Revista
ISSN da Revista
Título de Volume
Membros da banca
Programa
Resumo
© 2016 Elsevier B.V.This paper presents a study about creep behavior of SiC thin films with Cr interlayer deposited by High Power Impulse Magnetron Sputtering (HiPIMS) on Ti-6Al-4V alloys with Widmanstätten microstructure. After SiC/Cr film depositions, a microstructural characterization was performed using Scratching Test, Scanning Electron Microscopy (SEM), Scanning and Transmission Electron Microscopy (STEM), and Energy Dispersive Spectroscopy (EDS) techniques. Scratching tests showed that the film was well adhered to the substrate, which proves that the Cr interlayer is closely related to the strength of adhesion between SiC film and the substrate. The SiC film surface morphology has columnar shape according to STEM images. Creep test results were compared with earlier Ti-6Al-4V Widmanstätten microstructure studies, and they showed an increased lifetime for the Ti-6Al-4V Widmanstätten microstructure with SiC/Cr film, which indicates a higher creep resistance than the specimen without the SiC/Cr film. The SiC/Cr film deposited by HiPIMS improved the creep behavior of the Ti-6Al-4V Widmanstätten microstructure.
Descrição
Palavras-chave
Assuntos Scopus
Energy dispersive spectroscopies (EDS) , Film deposition , High power impulse magnetron sputtering (HIPIMS) , HiPIMS , Micro-structural characterization , Scanning and transmission electron microscopy , Ti-6 Al-4 V , Ti-6Al-4V alloy