Integrated polarizers based on tapered highly birefringent photonic crystal fibers

Tipo
Artigo
Data de publicação
2014
Periódico
Optics Express
Citações (Scopus)
5
Autores
Romagnoli P.
Biazoli C.R.
Franco M.A.R.
Cordeiro C.M.B.
De Matos C.J.S.
Orientador
Título da Revista
ISSN da Revista
Título de Volume
Membros da banca
Programa
Resumo
This paper proposes and demonstrates the creation of sections with a high polarization dependent loss (PDL) in a commercial highly birefringent (polarization maintaining) photonic crystal fiber (PCF), via tapering with pressure applied to the holes. The tapers had a 1-cm-long uniform section with a 66% scale reduction, in which the original microstructure aspect ratio was kept by the pressure application. The resulting waveguides show polarizing action across the entire tested wavelength range, 1510-1600 nm, with a peak PDL of 35.3 dB/cm (c.f. ∼1 dB/cm for a typical commercial polarizing fiber). The resulting structure, as well as its production, is extremely simple, and enable a small section with a high PDL to be obtained in a polarization maintaining PCF, meaning that the polarization axes in the polarizing and polarization maintaining sections are automatically aligned. © 2014 Optical Society of America.
Descrição
Palavras-chave
Assuntos Scopus
Highly birefringent photonic crystal fibers , Polarization axes , Polarization dependent loss , Polarization maintaining , Polarizing fibers , Pressure applications , Wavelength ranges
Citação
DOI (Texto completo)