A comparison between CoNiCrAlY bond coat and zirconia plasma sprayed coatings on creep tests
Tipo
Artigo de evento
Data de publicação
2008
Periódico
Materials Science Forum
Citações (Scopus)
0
Autores
Reis D.A.P.
Moura Neto C.
Couto A.A.
Silva C.R.M.
Piorino Neto F.
Barboza M.J.R.
Moura Neto C.
Couto A.A.
Silva C.R.M.
Piorino Neto F.
Barboza M.J.R.
Orientador
Título da Revista
ISSN da Revista
Título de Volume
Membros da banca
Programa
Resumo
Thermomechanical and electrical properties of zirconia-based ceramics have led to a wide range of advanced and engineering ceramic applications like solid electrolyte in oxygen sensors, fuel cells and furnace elements and its low thermal conductivity has allowed its use for thermal barrier coatings for aerospace engine components. A comparison between CoNiCrAlY bond coat and zirconia plasma sprayed coatings on creep tests of the Ti-6AI-4V alloy was studied. The material used was commercial Ti-6AI-4V alloy. Yttria (8 wt.%) stabilized zirconia (YSZ) with a CoNiCrAlY bond coat was atmospherically plasma sprayed on Ti-6AI-4V substrates by Sulzer Metco Type 9 MB. Constant load creep tests were conducted on a standard creep machine in air on coated samples, at stress levels of 520 MPa at 500°C to evaluate the oxidation protection on creep of the Ti-6AI-4V alloy. Results indicate that the creep resistance of the ceramic coating was greater than metallic coating.
Descrição
Palavras-chave
Assuntos Scopus
Constant load creep tests , Engineering ceramic , Low thermal conductivity , Oxidation protection , Plasma-sprayed coatings , Stabilized zirconia , Ti-6 Al-4 V , Zirconia-based ceramics