Effect of exfoliation medium on the morphology of multi-layer graphene oxide and its importance for Poly(Ethylene terephthalate) based nanocomposites

Página do item simplificado
dc.contributor.authorPinto G.M.
dc.contributor.authorSilva G.D.C.
dc.contributor.authorFechine G.J.M.
dc.date.accessioned2024-03-12T23:46:44Z
dc.date.available2024-03-12T23:46:44Z
dc.date.issued2020
dc.description.abstract© 2020 Elsevier LtdPoly(ethylene terephthalate) (PET)/multi-layer graphene oxide (mGO) nanocomposites were produced using the melt compounding technique, with the aid of a twin-screw extruder. The main goal was to investigate the effect of different exfoliation media on the morphology of graphene oxide and its effects, mainly on the mechanical performance of PET/mGO based polymer nanocomposites. Two different exfoliation media (water and ethanol) were used for the mGO synthesis. Based on each medium, nanocomposites with three different mGO contents (0.05 wt%, 0.1 wt%, and 0.3 wt%) were produced. When exfoliated in water, mGO sheets present larger lateral dimensions, i.e., higher surface area available to interact with polymer chains. All nanocomposites presented similar crystallinity, but with a slight increase related to the neat PET, indicating the nucleating effect of mGO. A theoretical model was used to predict the nanocomposites elastic modulus, justifying the experimental results. The biggest mechanical improvement was presented by a composite with low content of water-exfoliated mGO (0.1 wt%). The polymer tensile strength, strain at break, and toughness were improved by 19%, 238% and 590%, respectively. A significant reduction in the polymer dissipation factor (tanδ) with mGO content was also verified, indicating some confinement of polymeric chains due to interactions with the mGO sheets. The different surface fracture mechanisms presented by the nanocomposite with 0.1 wt% water-exfoliated mGO were verified, in which a good interface allowed greater release of strain energy. The XR-MT data confirmed that differences in mGO morphology can sensitively affect the final composite properties, characterising it as the driving force for mechanical improvements. Therefore, a melt compounded PET/graphene derivative composite is presented, exhibiting more promising results than what is already reported by solution mixed and in-situ polymerised composites. It was possible due to the strategic processing route utilised, in which the exfoliated mGO was pre-mixed with the polymer powder using the SSD technique.
dc.description.volume90
dc.identifier.doi10.1016/j.polymertesting.2020.106742
dc.identifier.issn0142-9418
dc.identifier.urihttps://dspace.mackenzie.br/handle/10899/34911
dc.relation.ispartofPolymer Testing
dc.rightsAcesso Restrito
dc.titleEffect of exfoliation medium on the morphology of multi-layer graphene oxide and its importance for Poly(Ethylene terephthalate) based nanocomposites
dc.typeArtigo
local.scopus.citations11
local.scopus.eid2-s2.0-85088914677
local.scopus.subjectComposite properties
local.scopus.subjectDissipation factors
local.scopus.subjectMechanical performance
local.scopus.subjectNucleating effect
local.scopus.subjectPoly(ethylene terephthalate) (PET)
local.scopus.subjectPolymer nanocomposite
local.scopus.subjectTheoretical modeling
local.scopus.subjectTwin screw extruders
local.scopus.updated2024-05-01
local.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85088914677&origin=inward
Arquivos
Coleções
Artigos de periódico