Correlation between solidification thermal variables, microstructure and mechanical strength of an Al-10wt%Si-2wt%Cu alloy Correlação entre variáveis térmicas de solidificação, microestrutura e resistência mecânica da liga Al-10%Si-2%Cu

Tipo
Artigo
Data de publicação
2017
Periódico
Revista Materia
Citações (Scopus)
10
Autores
Nascimento M.S.
Frajuca C.
Nakamoto F.Y.
Santos G.A.
Couto A.A.
Orientador
Título da Revista
ISSN da Revista
Título de Volume
Membros da banca
Programa
Resumo
© 2017, Universidade Federal do Rio de Janeiro. All rights reserved.The imposition of a wide range of operational conditions in foundry and castings process generates, as a di-rect consequence, a diversity of solidification structures. The mechanical properties show to depend strongly on the structural morphology and chemical composition. A low carbon steel mold was used to promote a uni-directional heat flow during solidification and to obtain the arrangement of the microstructure. The aim of the present article is to investigate the effect of thermal solidification variables on the microstructure of the Al- 10wt.%Si-2wt.%Cu alloy and its mechanical strength. Experimental results include primary dendrite arm spacings (EDP), tip growth rate (VL), cooling rate (TR) and tensile (LRT) and yield (LE) strength limits. A coarser dendritic structure tends to improve the tensile strength and the yield tensile strength in the studied alloy.
Descrição
Palavras-chave
Assuntos Scopus
Citação