Hybrid Corona–Dielectric Barrier Discharge for Permethrin Polymerisation on Polyamide Fabric at Atmospheric Pressure

Página do item simplificado
dc.contributor.authorPetraconi A.
dc.contributor.authorMiranda F.
dc.contributor.authorPrado E.
dc.contributor.authorBraite B.
dc.contributor.authorGasi F.
dc.contributor.authorBittencourt E.
dc.contributor.authorValadares G.
dc.contributor.authorMassi M.
dc.contributor.authorPetraconi G.
dc.contributor.authorda Silva Sobrinho A.
dc.date.accessioned2024-03-12T19:10:19Z
dc.date.available2024-03-12T19:10:19Z
dc.date.issued2023
dc.description.abstract© 2023, The Author(s), under exclusive licence to the Korean Fiber Society.This work presents permethrin (15%)-based monomers polymerisation in polyamide fabrics using hybrid corona–dielectric barrier discharge (DBD) to potentiate insect–parasite repellency functionalities in polyamide fabrics. First of all, the electric characterisation of the discharge was made using the Lissajous figure method for determining the plasma dosage (2841 W min m−2). Before the polymerisation process, the polyamide fabric was activated by DBD discharge, operating at 23 kHz and voltage amplitude of 12.5 kV in atmospheric pressure. After that, the polymerisation process is initiated by injecting permethrin into the system, maintaining the operational parameters used in the activation process. The non-activated and activated polyamide fabrics measured the static and dynamic contact angle, showing a variation from 120° (non-activated) to 34° (immediately after plasma activation). The chemical structure of synthesised permethrin was evaluated by Fourier transformed infrared (FTIR) spectroscopy to confirm the polymerisation (deposition) of permethrin on the fabric surface; it is possible to observe the 648 cm−1 bands that are associated with asymmetric vibration of the C–Cl bonds, but most evident change occurs at 1045 cm−1, which is associated with cyclopropyl group vibrations. Field emission scanning electron microscopy (FESEM) analysis was used to evaluate the possible degradation of the fabric surface when exposed to plasma activation and the homogeneity of the permethrin coating in the fibres after the polymerisation. The energy dispersive spectrometer (EDS) was used to confirm the polymerisation and the distribution of the permethrin in the fabric.
dc.description.firstpage373
dc.description.issuenumber2
dc.description.lastpage382
dc.description.volume24
dc.identifier.doi10.1007/s12221-023-00058-2
dc.identifier.issn1875-0052
dc.identifier.urihttps://dspace.mackenzie.br/handle/10899/34114
dc.relation.ispartofFibers and Polymers
dc.rightsAcesso Restrito
dc.subject.otherlanguageAdvanced fabrics
dc.subject.otherlanguageCoatings
dc.subject.otherlanguageFunctional fabrics
dc.subject.otherlanguagePlasma polymerisation
dc.subject.otherlanguageSurface modification
dc.titleHybrid Corona–Dielectric Barrier Discharge for Permethrin Polymerisation on Polyamide Fabric at Atmospheric Pressure
dc.typeArtigo
local.scopus.citations0
local.scopus.eid2-s2.0-85148416885
local.scopus.subjectAdvanced fabric
local.scopus.subjectDielectric barrier discharges
local.scopus.subjectElectric characterization
local.scopus.subjectFabric surfaces
local.scopus.subjectFunctional fabrics
local.scopus.subjectParasite-
local.scopus.subjectPermethrin
local.scopus.subjectPlasma activation
local.scopus.subjectPolymerization process
local.scopus.subjectSurface-modification
local.scopus.updated2024-12-01
local.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85148416885&origin=inward
Arquivos
Coleções
Artigos de periódico