Comparation between PIII superficial treatment and ceramic coating in creep test of Ti-6Al-4V alloy
dc.contributor.author | Reis D.A.P. | |
dc.contributor.author | Moura Neto C. | |
dc.contributor.author | Silva M.M. | |
dc.contributor.author | Ueda M. | |
dc.contributor.author | Oliveira V.S. | |
dc.contributor.author | Couto A.A. | |
dc.date.accessioned | 2024-03-13T01:32:33Z | |
dc.date.available | 2024-03-13T01:32:33Z | |
dc.date.issued | 2010 | |
dc.description.abstract | The objective of this work was evaluating the creep resistance of the Ti-6Al-4V alloy with superficial treatment of PIII superficial treatment and ceramic coating in creep test of Ti-6Al-4V alloy. It was used Ti-6Al-4V alloy as cylindrical bars under forged and annealing of 190°C by 6 hours condition and cooled by air. The Ti-6Al-4V alloy after the superficial treatment of PIII and ceramic coating was submitted to creep tests at 600°C and 250 and 319 MPa under constant load mode. In the PIII treatment the samples was put in a vacuum reactor (76×10-3 Pa) and implanted by nitrogen ions in time intervals between 15 and 120 minutes. Yttria (8 wt.%) stabilized zirconia (YSZ) with a CoNiCrAlY bond coat was atmospherically plasma sprayed on Ti-6Al-4V substrates by Sulzer Metco Type 9 MB. The obtained results suggest the ceramic coating on Ti-6Al-4V alloy improved its creep resistance © (2010) Trans Tech Publications. | |
dc.description.firstpage | 225 | |
dc.description.lastpage | 228 | |
dc.description.volume | 660-661 | |
dc.identifier.doi | 10.4028/www.scientific.net/MSF.660-661.225 | |
dc.identifier.issn | 1662-9752 | |
dc.identifier.uri | https://dspace.mackenzie.br/handle/10899/37241 | |
dc.relation.ispartof | Materials Science Forum | |
dc.rights | Acesso Restrito | |
dc.subject.otherlanguage | Creep | |
dc.subject.otherlanguage | PIII treatment | |
dc.subject.otherlanguage | Plasma-sprayed coatings | |
dc.subject.otherlanguage | Titanium alloy | |
dc.title | Comparation between PIII superficial treatment and ceramic coating in creep test of Ti-6Al-4V alloy | |
dc.type | Artigo de evento | |
local.scopus.citations | 0 | |
local.scopus.eid | 2-s2.0-78649919220 | |
local.scopus.subject | Constant loads | |
local.scopus.subject | Cylindrical bars | |
local.scopus.subject | PIII treatment | |
local.scopus.subject | Plasma sprayed | |
local.scopus.subject | Plasma-sprayed coatings | |
local.scopus.subject | Stabilized zirconia | |
local.scopus.subject | Superficial treatments | |
local.scopus.subject | Ti-6Al-4V alloy | |
local.scopus.updated | 2024-05-01 | |
local.scopus.url | https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=78649919220&origin=inward |