Internal Damping Ratio of Normal- and High-Strength Concrete Considering Mechanical Damage Evolution
Tipo
Artigo
Data de publicação
2024
Periódico
Buildings
Citações (Scopus)
0
Autores
Gidrao G.D.M.S.
Krahl P.A.
Bosse R.M.
Silvestro L.
Ribeiro R.S.
Lima G.T.D.S.
Carrazedo R.
Krahl P.A.
Bosse R.M.
Silvestro L.
Ribeiro R.S.
Lima G.T.D.S.
Carrazedo R.
Orientador
Título da Revista
ISSN da Revista
Título de Volume
Membros da banca
Programa
Resumo
© 2024 by the authors.This paper significantly extends investigations into internal damping ratios in both undamaged and damaged conditions for normal-strength concretes (NSCs) and high-strength concretes (HSCs). This study examines concretes with compressive strengths ranging from 42 to 83 MPa. Cyclic loads were applied using a servo-controlled hydraulic testing machine, and for each cyclic step, the dynamic elastic modulus ((Formula presented.)) and internal damping ratio ((Formula presented.)) were determined through acoustic tests. The results show that the normal-strength concretes ((Formula presented.) MPa) exhibited an undamaged internal damping ratio of (Formula presented.), reaching a maximum of (Formula presented.) at a damage index of 0.8. Conversely, the high-strength concrete mixtures ((Formula presented.) MPa) showed an undamaged internal damping ratio of (Formula presented.), with a peak value of (Formula presented.) at a damage index of 0.32. The initial internal damping values are influenced by porosity and transition zones, which affect the material behavior under cyclic loads. Progressive damage leads to increased Coulomb damping due the cracking process. Few studies have quantified and comprehended the internal damping ratio under cyclic loading-induced damage, and this research advances our understanding of NSC and HSC behavior under dynamic excitation and damage evolution, especially in impact scenarios.
Descrição
Palavras-chave
Assuntos Scopus
Acoustic tests , Damage evolution , Damage index , Damping ratio , High strength concretes , Internal damping , Internal damping ratio , Normal strength concrete and high strength concretes , Normal- and high-strength concretes , Usual concrete