A new approach of abrasive wear performance of flame sprayed NiCrSiBFeC/SiC composite coating

Página do item simplificado
dc.contributor.authorFals H.C.
dc.contributor.authorAguiar D.
dc.contributor.authorFanton L.
dc.contributor.authorXavier Belem M.J.
dc.contributor.authorCamello Lima C.R.
dc.date.accessioned2024-03-12T19:19:47Z
dc.date.available2024-03-12T19:19:47Z
dc.date.issued2021
dc.description.abstract© 2021 Elsevier B.V.The abrasive wear resistance of coatings of NiCrBSiFeC with the addition of 40% SiC applied by the flame spray process was evaluated. 420 μm thick layers were applied onto AISI 1020 steel substrates. The powder used is a commercial Metco ML16-C (Ni16Cr4Si4B3Cu3Mo2.5Fe0.5C) with particle size in the range of −125 + 53 μm and mechanically mixed for 2 h with medium-sized 29 μm SiC powder. The coatings were further remelted by the technique of surface flame melting. The surface and cross-sectional characterization, before and after the remelting, was performed by scanning electron microscopy (SEM), dispersive energy microanalysis (EDS), and x-ray diffraction (XRD). Microhardness profiles (HV0.05) were obtained in the cross-section. Abrasion tests were performed according to the ASTM G65 standard. It was found that the remelting process decreased the porosity, eliminated the defects of the interlayer as well as coating/substrate interfaces. The addition of the 40% SiC reinforcement caused an increase in the microhardness values mainly in the regions closer to the surface, on average 1119 HV0.05 in coatings without remelting and 1086 HV0.05 after remelting. The remelting decreased the mass loss, being 8.4 times less in the coatings without adding SiC and 6.8 times less in the coatings reinforced with SiC. NiCrBSi coatings reinforced with SiC and not remelted showed 17% less loss of mass. The quantitative analysis carried out by XRD enables us to confirm that the abrasive wear mainly causes significant loss of the eutectic phases (Ni3Si2 and Ni3B) and the detachment of the Cr carbides and borides. Further, the austenitic matrix (Ni γ) shows superior resistance to wear.
dc.description.volume477
dc.identifier.doi10.1016/j.wear.2021.203887
dc.identifier.issn0043-1648
dc.identifier.urihttps://dspace.mackenzie.br/handle/10899/34621
dc.relation.ispartofWear
dc.rightsAcesso Restrito
dc.subject.otherlanguageAbrasive wear
dc.subject.otherlanguageCoatings
dc.subject.otherlanguageNiCrSiBFeC
dc.subject.otherlanguageSiC
dc.subject.otherlanguageThermal spray
dc.titleA new approach of abrasive wear performance of flame sprayed NiCrSiBFeC/SiC composite coating
dc.typeArtigo
local.scopus.citations9
local.scopus.eid2-s2.0-85104053332
local.scopus.subjectAbrasive wear resistance
local.scopus.subjectComposites coating
local.scopus.subjectNew approaches
local.scopus.subjectParticles sizes
local.scopus.subjectSiC powder
local.scopus.subjectSpray process
local.scopus.subjectSteel substrate
local.scopus.subjectThermalspray
local.scopus.subjectThick layers
local.scopus.subjectWear performance
local.scopus.updated2024-12-01
local.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85104053332&origin=inward
Arquivos
Coleções
Artigos de periódico