Análise de causas de rejeições de peças de aço zincadas a quente

Abstract

In this work the causes of rejection of lots of artifacts from the company Produto para Linhas Preformados, PLP, were analyzed which are made of steel SAE 1010 and SAE 1020 and zinc coated by hot-dip galvanizing. Lots of samples from different manufacturers were selected, with different chemical composition and geometry, but belonging to rejected lots and approved lots in accordance with usual market standards. The rejections are due to problems related to the adhesion of the layer of zinc. The samples were submitted to optical microscopy test, scanning electron microscopy and X-ray diffractions for comparative checking of between the structures of zinc formed layers by hot -dip galvanizing. To verify the corrosion in coating failure, corrosion tests were performed in three different environments: urban environment considered to be low-polluted; environment simulating sea water, salt spray. There is no failure evidence between the zinc coating and the substrate structure; irregular coatings and not very well defined phases were found in the rejected parts. In regions with failures, the results show a behavior similar to the literature with the rapid formation of rust at the beginning of the exposure followed by a show oxidation.